> For the complete documentation index, see [llms.txt](https://docs.b2core.b2broker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.b2core.b2broker.com/how-to-articles/manage-payment-methods/how-to-add-deposit-and-withdrawal-methods-through-pss/how-to-integrate-payrock.md).
# How to integrate Payrock
[Payrock](https://payroc.com/) can be connected to B2CORE through [PSS](/integrations/payment-systems.md#payment-system-service-pss). It supports:
* Deposits in the following currencies: `CNY` (via Alipay, P2P, and bank transfers), `JPY` (via P2C and bank transfers), and `EGP` (via mobile money).
* Withdrawals in: `CNY` (via Alipay, P2P, and bank transfers) and `JPY` (via P2C).
In Payrock, each currency corresponds to a specific country, which means that the details shown in the payment form will be specific to that country — for example, the list of available banks for transfers.
Follow the instructions below to configure the Payrock connections and set up the deposit and withdrawal methods in the B2CORE Back Office. These instructions correspond to the [General procedure](/how-to-articles/manage-payment-methods/how-to-add-deposit-and-withdrawal-methods-through-pss.md) for adding methods for PSS-supported payment systems, but include details specific to Payrock.
{% hint style="info" %}
Before proceeding with the instructions, you must have signed up for Payrock and have an active account. You can consult the official [Payrock documentation](https://support.payroc.com/s/) or contact their support in case you have any questions.
{% endhint %}
## Configure connections to Payrock
If you plan to use Payrock for both deposits and withdrawals, you must configure two separate connections: one for deposits and another for withdrawals.
To configure a connection to Payrock:
{% stepper %}
{% step %}
In the B2CORE Back Office, navigate to **System** > **External connections**.
{% endstep %}
{% step %}
Click **+Create** in the upper-right page corner.
{% endstep %}
{% step %}
On the **Create connection** page, fill in the following fields:
* In the **Name** field, enter a name for the connection. The name must be unique and may only contain Latin letters, numbers, dashes, and underscores (for example, `Deposits_Payrock` or `Withdrawals_Payrock`).
* In the **Caption** field, enter a caption that will be applied to the connection in the Back Office.
* In the **Provider** dropdown, select:
* **PaymentSystemDeposit** — to add a connection that will be used for a deposit method.
* **PaymentSystemWithdrawal** — to add a connection that will be used for a withdrawal method.
{% endstep %}
{% step %}
In the **Driver** dropdown that appears, select **Payrock**.
{% endstep %}
{% step %}
In the **Credentials** section that appears, configure the Payrock-specific settings:
* In the **API base URL** field, specify `https://gateway-dev.payrock.io`.
* In the **Merchant code** field, enter the Merchant code assigned to your account by Payrock.
* In the **Merchant key** field, enter the secret key provided by Payrock for your merchant account, used to authenticate API requests.
You need to request the **Merchant code** and **Merchant key** from the Payrock support.
{% endstep %}
{% step %}
Click **Save** to create the connection.
The **Payrock** connection will appear in the list of external connections.
{% endstep %}
{% step %}
Check the connection status.
If the connection is inactive (**No** is displayed in the **Enabled** column), click the **Edit** button to open the connection details and set the **Enabled** dropdown to **Yes**.
{% endstep %}
{% step %}
Click **Save** to apply the changes.
{% endstep %}
{% endstepper %}
If you need to support both deposits and withdrawals via Payrock, follow the same instruction to create a new connection for the other operation.
## Add a deposit method through Payrock
To add and set up a method for making deposits through Payrock:
{% stepper %}
{% step %}
In the B2CORE Back Office, navigate to **System** > **Deposit system** > **Deposit methods**.
{% endstep %}
{% step %}
Click **+Create** in the upper-right page corner.
{% endstep %}
{% step %}
On the **Create a deposit method** page, fill in the following fields:
* In the **Name** field, enter a name for the method. The name must be unique and may only contain Latin letters, numbers, dashes, and underscores.
* In the **Caption** field, enter a caption for the method. This caption will be assigned to the method in the Back Office and will be visible to clients in the B2CORE UI.
* In the **Provider** dropdown, select **PaymentSystemDeposit**.
{% endstep %}
{% step %}
After selecting **PaymentSystemDeposit**, the following fields appear:
* In the **Available account currencies** dropdown, select one or more currencies. Deposits through Payrock will be available to accounts denominated in the selected currencies.
* In the **Driver** dropdown, select **Payrock**.
* In the **Connection** dropdown, select the previously configured [Payrock connection for deposits](#configure-connections-to-payrock).
{% endstep %}
{% step %}
Skip the **Configuration** section, as no settings are required for the Payrock deposit method.
{% endstep %}
{% step %}
Click **Save** to create the deposit method.
The **Payrock** deposit method will appear in the list of deposit methods.
{% endstep %}
{% step %}
Click **Edit** to enter the method details and complete the following fields:
* On the **Settings** tab, use the **Group** dropdown to select one or more groups where the method should be included.
* In the **Icon** field, specify the URL of an image that will be displayed as the icon for the deposit method in the B2CORE UI.
* Check the method status.
If the method is inactive (**No** is displayed in the **Enabled** field), activate it by setting the **Enabled** dropdown to **Yes**.
* On the **PS Currencies** tab, add the needed currency. To enable the method to process deposits in a specific currency, ensure it is added on this tab.
* If needed, configure commissions for the method on the **Commissions** tab (for details, refer to [How to configure commissions for deposit and withdrawal methods](/how-to-articles/manage-payment-methods/how-to-configure-commissions-for-deposit-and-withdrawal-methods.md)).
Payrock deposit method — Settings tab
{% endstep %}
{% step %}
Click **Test configuration** to validate the connection settings of the deposit method.
The test result will be displayed on the page.
{% endstep %}
{% step %}
After successfully validating the configuration, click **Save**.
{% endstep %}
{% endstepper %}
The **Payrock** deposit method is now configured in the B2CORE Back Office.
## Add a withdrawal method through Payrock
To add and set up a method for making withdrawals through Payrock:
{% stepper %}
{% step %}
In the B2CORE Back Office, navigate to **System** > **Payout system** > **Payout methods**.
{% endstep %}
{% step %}
Click **+Create** in the upper-right page corner.
{% endstep %}
{% step %}
On the **Create a payout method** page, fill in the following fields:
* In the **Name** field, enter a name for the method. The name must be unique and may only contain Latin letters, numbers, dashes, and underscores.
* In the **Caption** field, enter a caption for the method. This caption will be assigned to the method in the Back Office and will be visible to clients in the B2CORE UI.
* In the **Provider** dropdown, select **PaymentSystemWithdrawal**.
{% endstep %}
{% step %}
After selecting **PaymentSystemWithdrawal**, the following fields appear:
* In the **Available account currencies** dropdown, select one or more currencies. Withdrawals through Payrock will be available from accounts denominated in the selected currencies.
* In the **Driver** dropdown, select **Payrock**.
* In the **Connection** dropdown, select the previously configured [Payrock connection for withdrawals](#configure-connections-to-payrock).
{% endstep %}
{% step %}
Skip the **Configuration** section, as no settings are required for the Payrock withdrawal method.
{% endstep %}
{% step %}
Click **Save** to create the withdrawal method.
The **Payrock** withdrawal method will appear in the list of withdrawal methods.
{% endstep %}
{% step %}
Click **Edit** to enter the method details and complete the following fields:
* On the **Settings** tab, use the **Group** dropdown to select one or more groups where the method should be included.
* In the **Icon** field, specify the URL of an image that will be displayed as the icon for the withdrawal method in the B2CORE UI.
* Check the method status.
If the method is inactive (**No** is displayed in the **Enabled** field), activate it by setting the **Enabled** dropdown to **Yes**.
* On the **PS Currencies** tab, add the needed currency. To enable the method to process withdrawals in a specific currency, ensure it is added on this tab.
* If needed, configure commissions for the method on the **Commissions** tab (for details, refer to [How to configure commissions for deposit and withdrawal methods](/how-to-articles/manage-payment-methods/how-to-configure-commissions-for-deposit-and-withdrawal-methods.md)).
Payrock withdrawal method — Settings tab
{% endstep %}
{% step %}
Click **Test configuration** to validate the connection settings of the withdrawal method.
The test result will be displayed on the page.
{% endstep %}
{% step %}
After successfully validating the configuration, click **Save**.
{% endstep %}
{% endstepper %}
The **Payrock** withdrawal method is now configured in the B2CORE Back Office.
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.b2core.b2broker.com/how-to-articles/manage-payment-methods/how-to-add-deposit-and-withdrawal-methods-through-pss/how-to-integrate-payrock.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.